Characterization and optimization of a positively charged poly (ethylene glycol)diacrylate hydrogel as an actuating muscle tissue engineering scaffold

Hydrogels have been used for many applications in tissue engineering and regenerative medicine due to their versatile material properties and similarities to the native extracellular matrix. Poly (ethylene glycol) diacrylate (PEGDA) is an ionic electroactive polymer (EAP), a material that responds to an electric field with a change in size or shape while in an ionic solution, that may be used in the development of hydrogels. In this study, we have investigated a positively charged EAP that can bend without the need of external ions. PEGDA was modified with the positively charged molecule 2‐(methacryloyloxy)ethyl‐trimethylammonium chloride (MAETAC) to provide its own positive ions. This hydrogel was then characterized and optimized for bending and cellular biocompatibility with C2C12 mouse myoblast cells. Studies show that the polymer responds to an electric field and supports C2C12 viability.     

Characterization of the Engineering Flow in a Miniaturised Bioreactor by Computational Fluid Dynamics

Three approaches based on computational fluid dynamics(CFD) techniques have been assessed for their ability to describe the engineering flow environment in a miniaturized mechanically agitated bioreactor. The three approaches tested were the source-sink(SS), the multiple reference frames (MRF) and the sliding grids(SG). In all the cases, the predictions of the velocity components agree with reported experimental data. However, the analysis of the results of the turbulent intensities predicted by the three approaches indicates the MRF and the SG techniques under predicted turbulent intensities are comparable to both experimental measurements and the SS method. The predicted power number and pumping number based on the SS ap-proach are closer to typical reported experimental values compared to those obtained from the MRF and SG methods.     

Numerical Simulation of Mixing in a Micro-well Scale Bioreactor by Computational Fluid Dynamics

ＩｎｔｒｏｄｕｃｔｉｏｎＳｈａｋｅｆｌａｓｋｓａｒｅｕｓｅｄｒｏｕｔｉｎｅｌｙｉｎｔｈｅｐｈａｒｍａｃｅｕ ｔｉｃａｌ,ｂｉｏｃｈｅｍｉｃａｌａｎｄｍｅｄｉｃａｌｆｉｅｌｄｓｆｏｒｃｅｌｌｇｒｏｗｔｈｃｕｌｔｕｒｅ ,ｍｅｄｉａｓｃｒｅｅｎｉｎｇａｎｄｆｏｒｃｅｌｌｅｘｐａｎｓｉｏｎ .Ｓｈａｋｅｆｌａｓｋｆｅｒｍｅｎｔａｔｉｏｎｒｅｑｕｉｒｅｓｒｅｌａｔｉｖｅｌｙｓｍａｌｌａｍｏｕｎｔｓｏｆｍａｔｅｒｉａｌ,ｔｙｐｉｃａｌｌｙｂｅｔｗｅｅｎ 5 0ａｎｄ 5 0 0ｍＬ ,ａｎｄｒｅｌｉｅｓｏｎａｈｏｒｉｚｏｎ…     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.     

Determination of the formation constant for the inclusion complex between Lanthanide ions and Dansyl chloride derivative by fluorescence spectroscopy: Theoretical and experimental investigation

In this paper, a sensitive, easy, efficient, and suitable method for the calculation of K_f values of complexation between one derivative of Dansyl chloride [5-(dimethylamino) naphthalene-1-sulfonyl 4-phenylsemicarbazide] (DMNP) and Lanthanide(III) (Ln) ions is proposed, using both spectrofluorometric and spectrophotometric methods. Determination of K_f showed that DMNP was mostly selective towards the erbium (III) ion. The validity of the method was also confirmed calculating the Stern–Volmer fluorescence quenching constants (K_sv) that resulted in the same consequence, obtained by calculating the K_f of complexation values. In addition, the UV–vis spectroscopy was applied for the determination of K_f only for the Ln ions that had interactions with DMNP. Finally, the DFT studies were done on Er³⁺ and the DMNP complex for distinguishing the active sites and estimating the pair wise interaction energy. It can be concluded that this derivative of Dansyl chloride with inherent high fluorescence intensity is a suitable reagent for the selective determination of the Er³⁺ ion which can be used in constructing selective Er³⁺ sensors.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Recent developments in dispersive liquid–liquid microextraction

During the past 7 years and since the introduction of dispersive liquid–liquid microextraction (DLLME), the method has gained widespread acceptance as a simple, fast, and miniaturized sample preparation technique. Owing to its simplicity of operation, rapidity, low cost, high recovery, and low consumption of organic solvents and reagents, it has been applied for determination of a vast variety of organic and inorganic compounds in different matrices. This review summarizes the DLLME principles, historical developments, and various modes of the technique, recent trends, and selected applications. The main focus is on recent technological advances and important applications of DLLME. In this review, six important aspects in the development of DLLME are discussed: (1) the type of extraction solvent, (2) the type of disperser solvent, (3) combination of DLLME with other extraction methods, (4) automation of DLLME, (5) derivatization reactions in DLLME, and (6) the application of DLLME for metal analysis. Literature published from 2010 to April 2013 is covered.